INSTALLING LIGHT-POLES HAZARD IDENTIFICATION AND RISK ASSESSMENT

The under discussion points will help you to prepare "HAZARD IDENTIFICATION AND RISK ASSESSMENT FOR INSTALLING LIGHT-POLES" 

Work Method / Task Description

1. Check layout and crane access for standing & unloading poles.
2. Receive poles & lights on site and confirm correct numbers and types.
3. Install cable underground or overhead.
4. Check light fitting base or bracket and terminate cabling into the fitting.
5. Check crane or other lifting equipment and operator’s qualifications are up to date. Ensure spotter is available to prevent pedestrians from entering the work area & traffic management as required.
6. Install the pole, ensure it is secure, and installed to specifications.
7. Complete the fitting of any other parts and wiring to the light poles.

Hazard Identification

1. Tripping, pedestrians & traffic
2. Struck by falling objects
3. Manual handling, Falling from heights
4. Struck by falling objects.
5. Pedestrians Unsafe equipment. Overhead cables. Manual handling
6. Manual handling Struck by falling objects Falling
7. Manual handling, Cable connections & testing

Recommended Actions / Controls for Prevention

1. Ensure area, in particular, walkways are clear of trip hazards. Implement any pedestrian & traffic control. Wear safety footwear, gloves, helmet & Hi-Vis Clothing.
2. Use appropriate protective gloves. Check access. Keep the lifting area clear of people.  Barricade work area. Implement manual handling risk control procedures.
3. Test and confirm cables before commencing work. Isolate and fit danger tags as appropriate were running near live equipment. Use ladders or work platforms appropriately. Manual lifting PPE procedures to be used.
4. Keep the lifting area clear of people. Barricade work area
5. Use a spotter to control unauthorized access. Pre-operation check of equipment. Use spotter as required. Implement manual handling risk control procedures. Check PPE is worn. Wear safety footwear, gloves, helmet & Hi-Vis Clothing.
6. Use appropriate protective gloves. Barricade work area.
7. Use ladders or work platforms appropriately. Confirm all connected cables are isolated & tagged.

 INSTALLING LIGHT-POLES HAZARD IDENTIFICATION AND RISK ASSESSMENT

DOWNLOAD FILE HERE 👇

INSTALLING LIGHT-POLES HAZARD IDENTIFICATION AND RISK ASSESSMENT