 |
| PROCEDURE FOR STORING FUEL ON CONSTRUCTION SITES |
This procedure for "PROCEDURE FOR STORING FUEL ON CONSTRUCTION SITES", uploaded by the QHSE Documents outlines the safe storage, handling, and emergency preparedness for fuel storage on construction sites in compliance with international standards and codes, including NFPA (National Fire Protection Association), OSHA (Occupational Safety and Health Administration), ISO 45001, and local regulations.
1. Approved Fuel Storage
Fuel may be stored only in approved mobile refueling tanks that meet the standards of NFPA 30 (Flammable and Combustible Liquids Code) and ISO 1998-5 (Petroleum Industry Terminology—Fuel Systems).
All refueling tanks shall bear proper labeling as per the Transportation of Dangerous Goods (TDG) Regulations and GHS (Globally Harmonized System) standards, including hazard and flammability information.
2. Safe Storage Location
Fuel storage areas should be located in a designated zone, away from the active vehicle and equipment pathways to prevent accidental collisions.
To avoid contamination, fuel storage must be positioned away from drainage channels and natural waterways, in compliance with EPA (Environmental Protection Agency) spill control requirements and ISO 14001 (Environmental Management).
3. Spill Prevention and Containment
Where there is a risk of fuel spillage contaminating nearby streams, waterways, or sewers, storage must comply with the diking requirements as per the Liquid Fuels Handling Code (LFHC). Properly constructed containment dikes or secondary containment systems should be in place to capture any spills.
Emergency spill kits containing absorbent materials, personal protective equipment (PPE), and disposal bags must be available at all times within close proximity to the fuel storage area to comply with ISO 14001 environmental management protocols.
4. Fire Prevention and Equipment
Fire extinguishers (minimum rating of 4A, 40BC) shall be stationed near fuel storage areas. Placement of extinguishers should be in compliance with NFPA 10 (Standard for Portable Fire Extinguishers) and accessible for quick use.
Worker Training: All personnel required to use fire extinguishers must undergo fire safety training to ensure proper operation in emergencies, as mandated by OSHA 29 CFR 1910.157.
5. Smoking and Fire Hazard Prevention
No Smoking Policy: Smoking is strictly prohibited in and around the fuel storage facility. "No Smoking" signs are to be prominently displayed and regularly maintained. Smoking is prohibited during any refueling operations, as per NFPA 30A.
Hot Work Restrictions: No “hot work” (e.g., welding, cutting, brazing) shall take place within 3 meters (10 feet) of any fuel storage area to reduce the risk of ignition, in line with OSHA 29 CFR 1926.152 and ISO 45001 occupational safety standards.
6. Waste Disposal and Combustible Material Storage
Waste Management: All waste oils, lubricants, oily rags, and other materials susceptible to spontaneous combustion shall be stored in dedicated, labeled containers and regularly disposed of according to EPA hazardous waste regulations and ISO 14001 guidelines.
7. Compliance and Review
The fuel storage procedure will be periodically reviewed to ensure ongoing compliance with international safety and environmental standards, as well as applicable local regulations.
Records of inspections, training, and any incident responses shall be maintained in compliance with ISO 45001 safety management protocols.
References
NFPA 30: Flammable and Combustible Liquids Code
NFPA 10: Standard for Portable Fire Extinguishers
OSHA 29 CFR 1910.157: Portable Fire Extinguishers
OSHA 29 CFR 1926.152: Flammable Liquids
ISO 1998-5: Petroleum Industry Terminology—Fuel Systems
ISO 14001: Environmental Management
ISO 45001: Occupational Health and Safety Management Systems
EPA: Spill Prevention, Control, and Countermeasure (SPCC)
0 Comments